|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Ordering number : ENN7221A CPH3123 / CPH3223 CPH3123 / CPH3223 Applications * PNP / NPN Epitaxial Planar Silicon Transistors High-Current Switching Applications DC-DC converter, relay drivers, lamp drivers, motor drivers, flash. Features * * * * * * Adoption of MBIT processes. High current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm). High allowable power dissipation. Specifications ( ) : CPH3123 Absolute Maximum Ratings at Ta=25C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCES VCEO VEBO IC ICP IB PC Tj Tstg Mounted on a ceramic board (600mm2!0.8mm) Conditions Ratings (--50)100 (--50)100 (--)50 (--)6 (--)3 (--)6 (--)600 0.9 150 --55 to +150 Unit V V V V A A mA W C C Electrical Characteristics at Ta=25C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob Conditions VCB=(--)40V, IE=0 VEB=(--)4V, IC=0 VCE=(--)2V, IC=(-)100mA VCE=(--)10V, IC=(--)500mA VCB=(--)10V, f=1MHz 200 (390)380 (24)13 Ratings min typ max (-)1 (-)1 560 MHz pF Unit A A Marking : CPH3123 : AU, CPH3223 : CU Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN N1504 TS IM TB-00000301 / 71002 TS IM TA-100095, 3619 No.7221-1/5 CPH3123 / CPH3223 Continued from preceding page. Parameter Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol VCE(sat) VBE(sat) V(BR)CBO V(BR)CES V(BR)CEO V(BR)EBO ton tstg tf Conditions IC=(--)1A, IB=(--)50mA IC=(--)2A, IB=(-)100mA IC=(--)2A, IB=(-)100mA IC=(--)10A, IE=0 IC=(--)100A, RBE=0 IC=(--)1mA, RBE= IE=(-)10A, IC=0 See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. (--50)100 (--50)100 (--)50 (--)6 (30)35 (230)300 (18)25 Ratings min typ max (--115)90 (--230)130 (--240)160 (--650)240 (--)0.88 (--)1.2 Unit mV mV V V V V V ns ns ns Package Dimensions unit : mm 2150A 2.9 0.4 3 0.6 Switching Time Test Circuit 0.2 0.15 PW=20s D.C.1% INPUT IB1 OUTPUT IB2 VR 50 RB 0.05 1.6 2.8 RL 0.6 1 1.9 2 + 100F + 470F VCC=25V 0.7 0.9 1 : Base 2 : Emitter 3 : Collector SANYO : CPH3 0.2 VBE= --5V IC=10IB1= --10IB2=1A For PNP, the polarity is reversed. --2.0 --1.8 IC -- VCE CPH3123 5.0 IC -- VCE CPH3223 0 --4 mA 0 --3 mA --20 mA 4.5 10 0mA 80mA 60mA Collector Current, IC -- A --1.4 --1.2 --1.0 --0.8 --0.6 --0.4 --0.2 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 Collector Current, IC -- A --1.6 A --10m --8mA --6mA --4mA 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 40mA 20mA 10mA --2mA 5mA IB=0 --0.9 --1.0 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 IB=0 1.8 2.0 Collector-to-Emitter Voltage, VCE -- V --3.0 IT04564 3.0 IC -- VBE Collector-to-Emitter Voltage, VCE -- V IT04565 IC -- VBE CPH3123 VCE= --2V --2.5 2.5 CPH3223 VCE=2V Collector Current, IC -- A --2.0 Collector Current, IC -- A 2.0 --1.5 1.5 --1.0 1.0 C 25C --25C --0.5 0.5 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 IT04566 0 0 0.2 0.4 0.6 0.8 1.0 1.2 IT04567 Base-to-Emitter Voltage, VBE -- V Base-to-Emitter Voltage, VBE -- V Ta=7 5C 25C --25C Ta=7 5 No.7221-2/5 CPH3123 / CPH3223 1000 7 5 hFE -- IC CPH3123 VCE= --2V DC Current Gain, hFE 1000 7 5 hFE -- IC CPH3223 VCE=2V DC Current Gain, hFE Ta=75C 25C 3 2 --25C Ta=75C 25C 3 --25C 2 100 7 5 --0.01 100 7 0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 Collector Current, IC -- A 1000 IT04568 1000 7 f T -- IC Collector Current, IC -- A IT04569 f T -- IC Gain-Bandwidth Product, f T -- MHz Gain-Bandwidth Product, f T -- MHz 7 5 CPH3123 VCE= --10V 5 3 2 CPH3223 VCE=10V 3 2 100 7 5 3 2 100 7 5 3 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 10 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 Collector Current, IC -- A 100 IT04570 100 7 Cob -- VCB Collector Current, IC -- A IT04571 Cob -- VCB CPH3123 f=1MHz Output Capacitance, Cob -- pF CPH3223 f=1MHz Output Capacitance, Cob -- pF 7 5 5 3 2 3 2 10 7 10 --1.0 2 3 5 7 --10 2 3 5 Collector-to-Base Voltage, VCB -- V 5 3 7 --100 IT04572 5 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 VCE(sat) -- IC Collector-to-Base Voltage, VCB -- V 5 5 7 100 IT04573 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 2 CPH3123 IC / IB=20 3 2 CPH3223 IC / IB=20 --1000 7 5 3 2 --100 7 5 3 2 --10 --0.01 100 7 5 3 2 5C =7 Ta 5C 25C --2 Ta = 75 C 2 3 5 7 0.1 2 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 5 7 --10 IT04574 10 0.01 --2 3 C 25 5 C 5 7 1.0 2 3 Collector Current, IC -- A 5 7 10 IT04575 No.7221-3/5 CPH3123 / CPH3223 7 5 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 3 2 CPH3123 IC / IB=50 7 5 3 2 VCE(sat) -- IC CPH3223 IC / IB=50 --1000 7 5 3 2 --100 7 5 3 2 --10 --0.01 100 7 5 3 2 Ta= C 75 5 --2 C C 75 a= T C 5C 25 --2 C 25 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 IT04576 10 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 Collector Current, IC -- A 3 VBE(sat) -- IC Collector Current, IC -- A 3 IT04577 VBE(sat) -- IC Base-to-Emitter Saturation Voltage, VBE(sat) -- V Base-to-Emitter Saturation Voltage, VBE(sat) -- V CPH3123 IC / IB=50 CPH3223 IC / IB=50 2 2 --1.0 Ta= --25C 1.0 Ta= --25C 25C 7 5 25C 75C 7 75C 5 3 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 5 7 --10 IT04578 3 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 ASO ms Collector Current, IC -- A 1.0 0.9 5 7 10 IT04579 PC -- Ta ICP=6A IC=3A 10 <50s 10 CPH3123 / CPH3223 Collector Dissipation, PC -- W 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 5 7 100 IT04580 0 20 40 60 80 100 120 140 160 10 Collector Current, IC -- A 0m 50 1m s s 0 M 0 s s ou nt ed on DC ac op er er am ati ic on bo ar d (6 00 m 0.01 0.1 CPH3123 / CPH3223 Ta=25C Single pulse For PNP, minus sign is omitted. Mounted on a ceramic board (600mm2!0.8mm) 2 3 5 7 1.0 2 3 5 7 10 2 3 m2 ! 0. 8m m ) Collector-to-Emitter Voltage, VCE -- V Ambient Temperature, Ta -- C IT04581 No.7221-4/5 CPH3123 / CPH3223 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of November, 2004. Specifications and information herein are subject to change without notice. PS No.7221-5/5 |
Price & Availability of CPH3223 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |